Spring customization share common spring types
Extensionspring
It is that each ring is closely and tightly surrounded, so that it can bear the force and become longer. Each end is wound with a loop. The following are the necessary materials for a tensile spring:
(1) Random length: (a) total length, (b) length of all loops, (c) length from hook loop.
(2) Operating diameter: (a) diameter, (b) inner diameter, (c) inner diameter of waterproof casing.
(3) Stainless steel wire specification "cable diameter".
(4) Raw materials (type, grade).
(5) Turns: (a) total turns and (b) left-handed body or left-handed body.
(6) Tail end method.
(7) Load in the hook.
(8) Load, tensile strain, pounds per inch.
(9) The length of the larger Lashin.
Extension spring is a typical spring, which means that it can be formed according to the design scheme from straight cylindrical shape to various combinations, and even various shapes of hooks.
Extension spring is the opposite application of reduction spring. The application scope is probably less than the actual product type, but the real-time control is one level higher than that of reduction spring.
Compression spring
Each coil is wound separately. Because it can bear the force, both sides can be opened or closed, or wound flat or ground off. The following materials are necessary for a reduction spring:
(1) Control diameter (a) diameter, (b) inner diameter, (c) inner diameter of waterproof sleeve, (d) outer diameter of round rod.
(2) Specification of stainless steel wire or steel rod.
(3) Raw materials (type and grade).
(4) Turns: (a) total turns and (b) left-handed body or left-handed body.
(5) Style of ends.
(6) Load under a certain length of deflection zone.
(7) Load ratio within the range of one inch to several inches.
(8) The larger body height is "maximum solid height".
(9) When applied, Z is small and reduced to high.
Compression spring is a kind of combination spring, which can be formed according to the design scheme from straight tube type, cone type to retracted, convex waist type, and even various combinations of tails.
Compression spring is one of the most widely used spring types. It covers a wide range of products such as electronic devices, motors, electronic computers, information content, turbo generator sets, bicycles, hardware tools, gifts, small toys, and even national defense science and technology. Because its design scheme and basic principles are easy to grasp, the manufacturing operation is more simple.
